# DeckBridge

DeckBridge is a native macOS menu-bar app that lets you play Syndicate, the DJ and performance software by Untitled Audio, from a Denon LC6000 PRIME controller. It reads the controller's MIDI over USB, converts it, sends it to Syndicate's OSC input, and lights the controller from Syndicate's OSC feedback.

- Website: https://getdeckbridge.app/
- Support: https://getdeckbridge.app/support/
- Privacy: https://getdeckbridge.app/privacy/
- Contact: deckbridge@ericdahl.dev

## Why it exists

Syndicate's own MIDI mapping (version 0.3.7) can't handle the LC6000's 14-bit jog wheel or its 14-bit pitch fader, and it gives LED feedback only to the DDJ-FLX4 and FLX10. DeckBridge fills that gap: the LC6000 talks MIDI to DeckBridge, and DeckBridge talks OSC to Syndicate.

```
LC6000 PRIME --USB MIDI-->  DeckBridge  --OSC, port 9090-->           Syndicate
LC6000 PRIME <--MIDI LEDs-- DeckBridge  <--OSC feedback, port 9096--  Syndicate
```

## Features

- **Full-resolution jog and pitch:** the 14-bit jog wheel and pitch fader reach Syndicate at full resolution. Pickup on the pitch fader keeps the tempo from jumping.
- **Four decks from one controller:** DeckBridge follows the LC6000's own deck layers (Shift + deck select), so one unit drives decks 1 to 4.
- **Deck colors:** deck colors follow Syndicate's palette live, and the jog ring lights in the deck's color.
- **Shift functions:** the LC6000's printed Shift functions work.
- **LEDs:** Play, Cue, Sync and the pads light from Syndicate's state. Hot cues show Syndicate's cue colors.
- **Safe recovery:** unplugging the controller, sleeping the Mac or quitting releases every held control first. Plugging back in repaints the LEDs.
- **Diagnostics:** a MIDI monitor, an LED sweep and an OSC log show what comes in and what goes out.
- **Demo controller:** try DeckBridge without hardware. A scripted controller plays against a simulated session.
- **A second controller:** a second LC6000 can drive another deck.
- **Syndicate on another Mac:** DeckBridge can reach Syndicate over the local network.
- **Coming in v1.1:** the jog-wheel display showing art in real time.

## Requirements

- macOS 26 or later.
- Syndicate, with OSC input enabled.
- A Denon LC6000 PRIME connected over USB. The LC6000 PRIME is the only controller supported today.

DeckBridge does not need djay Pro or Engine DJ. It works with Syndicate only.

## Setup in brief

Four settings in Syndicate, once. DeckBridge opens a setup guide with the same steps on first launch.

1. **Settings → OSC:** turn OSC input on. The listen port is 9090.
2. **Settings → OSC Feedback:** set DEST IP to 127.0.0.1 (or this Mac's address if Syndicate runs on another Mac) and PORT to 9096.
3. **Settings → OSC Feedback → Subscriptions:** turn on Playing, PlayPending, Loaded and TrackInfo, Position/Progress, TempoSlider/TempoSliderEnabled, Cues, BPM/Sync and Loop.
4. **Settings → MIDI:** turn the LC6000 PRIME's MIDI input off in Syndicate, so Syndicate's own mapping and DeckBridge don't both react to every button.

Quit djay Pro, Engine DJ or any other app using the controller first, and power-cycle the controller if one was open. When it's working, the DeckBridge panel shows CONTROLLER CONNECTED and FEEDBACK LIVE.

Full steps: https://getdeckbridge.app/support/

<!-- FAQ:START: provisional; the final FAQ copy will be synced here later. Keep every Q&A between these markers. -->
## FAQ

### Does DeckBridge need djay Pro or Engine DJ?

No. DeckBridge works with Syndicate only. Quit djay Pro, Engine DJ or any other app using the controller first, and power-cycle the controller if one was open.

### Which controllers are supported?

Only the Denon LC6000 PRIME, today.

### The controller works, but the LEDs stay dark.

DeckBridge lights the controller from Syndicate's OSC feedback. Check that OSC Feedback is set to DEST IP 127.0.0.1 and PORT 9096, and that every listed subscription is on. The panel's "Why no LEDs?" line says which part is missing.

### How do I switch between decks 1 to 4?

Use the LC6000's own deck layers: Shift + deck select. DeckBridge follows the layer, releases anything held on the old deck and repaints the lights. To drive one fixed deck instead, turn off Follow controller layers in Settings and pick the deck in the panel.

### Nothing happens when I press buttons.

Quit any other DJ app that was using the LC6000 PRIME, then power-cycle the controller: some apps switch its MIDI mode until it restarts. Then check Diagnostics › MIDI Monitor: each button press should show up there.

### Can Syndicate run on another Mac?

Yes. Set the Syndicate host in DeckBridge's Settings to that Mac's IP address, and set Listen on to All networks. macOS asks once for local-network permission; allow it, or no feedback arrives.

### Can I try it without a controller?

Yes. Turn on the demo controller in the panel. A scripted controller plays against a simulated session, with nothing sent to the network.

### Does DeckBridge collect any data?

No. DeckBridge collects no data: no account, no analytics, no tracking.
<!-- FAQ:END -->

## Status and availability

- **Version 1.0.1** is in beta on TestFlight now. Until the public link is live, email deckbridge@ericdahl.dev to join the beta. <!-- TODO(user): TestFlight public link -->
- **Mac App Store:** coming soon.
- **Price:** pricing has not been announced. <!-- TODO(user): price -->

## Privacy

DeckBridge collects no data. There is no account, no analytics and no tracking. It sends OSC messages only to Syndicate, on this Mac by default or on your local network if you set it up that way. This website uses no cookies, no analytics and no third-party fonts or scripts. Details: https://getdeckbridge.app/privacy/

## Contact

Email deckbridge@ericdahl.dev. If you can, include what the DeckBridge panel shows and the Copy details text.

## Trademarks

DeckBridge is an independent app. It is not made by, affiliated with or endorsed by Untitled Audio or Denon DJ. Syndicate is a separate app by Untitled Audio. Denon DJ and LC6000 PRIME are trademarks of their owners.
